Orbit 62061 — Programmable Digital Hose Watering Timer (1 Outlet, LCD, Battery-Powered)

What is it and what's it for?

Think of it as the mechanical timer in this catalog, but with memory: instead of rewinding it for a single watering, you program it once — how long to water (1 to 240 minutes) and how often to repeat it (every 6 hours, 12 hours, or every 1 to 7 days) — on an LCD screen, and the unit remembers on its own, opening and closing the water on every scheduled cycle without you touching it again, running on batteries with no WiFi or house power needed.

Real-world use cases

• At home: You're leaving for a 10-day trip and already have last summer's drip kit set up for the patio pots — instead of buying a whole new kit with a timer bundled in, you add this timer to the existing faucet, program 20 minutes every 2 days, and it repeats on its own while you're away, with no reprogramming.
• In a business or workshop: A nursery or landscaper maintaining several standalone hose bibs around a property (no central controller or 24V wiring) uses one of these per faucet to automate watering for each zone separately, without the cost or electrical install of a full solenoid valve system.

How to avoid buying the wrong one

• It's single-outlet (one faucet) — if you need to automate more than one point at once, this alone isn't enough, you'd need a multi-zone WiFi controller or one of these per faucet.
• It runs on batteries with no WiFi: you program and check it by hand on its own dial/screen, not from your phone — if you need to check or adjust watering remotely while traveling, this doesn't solve that.
• Confirm your faucet has standard garden hose thread (GHT), same as the mechanical timer in this catalog — it's not built for pipe thread (FPT/MPT) like the solenoid valves.